Motorcycle Club » The Royal Star Venture Palace

Venture clutch....

7 posts from 4 voices
About This Topic
  1. trakon
    #

    Anyone know how to adjust the clutch?

  2. hik4z
    #

    It is hydraulic, you don't,, if it is not disengaging the clutch you should change the fluid and bleed it. If it is slipping, you probably need to change the clutch springs to stiffer ones,, stock clutch springs are kinda weak.

  3. Gooze
    #

    It is hydraulic, you don't,, if it is not disengaging the clutch you should change the fluid and bleed it. If it is slipping, you probably need to change the clutch springs to stiffer ones,, stock clutch springs are kinda weak.
    Does anyone make a heavier duty spring for this engine? When I changed my clutches a few months ago I looked several places for one, but no luck.

  4. zarke172
    #

    buy the BARNETT pressure plate.use stock yamaha friction discs and steels.your clutch lever action will be a little heavier,but your clutch WON'T slip.

  5. Gooze
    #

    buy the BARNETT pressure plate.use stock yamaha friction discs and steels.your clutch lever action will be a little heavier,but your clutch WON'T slip.
    Thanks again Sarge, Where would one find this Barnett Pressure Plate, does J&P have them?

  6. zarke172
    #

    google BARNETT CLUTCH KITS---choose where you want to get the part.

  7. Gooze
    #

    google BARNETT CLUTCH KITS---choose where you want to get the part.
    Thanks!

Reply

You must log in to post.