Motorcycle Club » Star 1100 Classic & Custom

Handlebar Risers

10 posts from 8 voices
About This Topic

  1. Member
    #

    I desperately need risers for my 05 Silverado 1100. I'd like to go the limit without having to replace the cables so I'd like to know which risers are 3" x 1.5" as VstarManiac mentioned another post. I've looked at many websites but don't recall seeing that exact size.
    For VstarManiac - did you get them installed and if so how did the stock cables work out?

    Thanks in advance.

  2. Member
    #

    I just recently talked with the parts guy at my local dealership about risers, what he told me was that the small risers that yamaha sells are the biggest I could go on my '05 1100 custom, without having to replace cables, with those the brake line would have to be manuvered. Not sure if same is true for your silverado, but I imagine its close, also not sure on the size of risers just remember it was the smaller ones. hope that helps.

  3. Member
    #

    I'm In The Same Situation. Looking For 3" Risers Without Replacing The Cables. But As Far As I Know For The Silverado We Need New Cables, No Excuse. So I'm Looking For A Good Set Of Risers With A Set Of New Cables. ( Nice Chrome Finish).
    Let Ne Know Guys If You Find Any Good Deals.
    And Do It Yourself Ideas????
    Sincerely
    Bero

  4. Member
    #

    I to am in need of a set of risers, other than the OEM Parts.
    I have located a Canadian Parts Catalog that can be down loaded. It is from "Custom World" They have risers on page # 75. for about $250.00, depending on the size. the site is:
    cw-intl.com/eng/home.asp
    If any one knows of any other place to where risers can be purchased along with an upper brake cable to acomodate, please let me know. I know that this cable will have to be replaced.
    with thanks
    Ron

  5. Member
    #

    Hi rmazd,

    There are many sources for risers for the V-Stars. Here are several:

    hellrisercustoms.com/sele...20for%20V-Star

    cruisercustomizing.com/li...1100_Silverado

    scootworks.com/shop.cgi/p...D=PUT_SID_HERE

    These are some of the most well stocked of the aftermarket suppliers I found and with fairly good pricing too.

    I found a source for OEM Yamaha risers too and they had decent prices.

    powerpartsplus.com/pages/...-controls.aspx

    You can just click on each of the links and you should be taken directly to the websites.

    Hope this is helpful to you. Good luck and let me know how it works out.

    Best,

  6. Member
    #

    guys what size/diameter is vstar handdle bar, need to replace the grip to more custom looks

  7. Member
    #

    I had the Doc Chuck risers on my 1100 and worked great with stock cables. I think Baron's makes them, but not sure.

  8. Member
    #

    guys what size/diameter is vstar handdle bar, need to replace the grip to more custom looks
    I believe they are 1" as most road bikes are.

  9. Member
    #

    I installed the 3X3 chrome risers from Tim B. (Metric Magic). You can contact him on the Delphi forum. I did replace the upper brake line, but I think it may have worked by adjusting the banjo fitting at the master cylinder.
    I just decided to replace it to aviod problems per Tim's suggestion. He sells the risers for about $75.00, and I think the brake line was about $55.00 for the stainless braid.
    The risers made a big difference as far as the comfort of the bike. I'm 6'1", and felt like I was always reaching for the bars. There are some pics of the risers he offers in some of the older posts if you want to take a look at them. Just a suggestion for a different option. Good luck!
    Dan

  10. Member
    #

    Another alternative for the brake hose is to just have one made for you locally. Most places have a shop that does that. There are several here in Tucson and I think it was like $25 to have one made in black, $10 extra for braided steel. that was a lot cheaper than most bike retailers.

    My 06 Custom had 4" X 2" risers and drag bars with the stock cables/hose when I got it. I've changed it 3 more times with the last change coming up in a few weeks. FINALLY.

    One thing I'll say from experience. Go sit on a few bikes to make sure you have the right handlebar location that is most comfortable for you. I've spent a ton of cash on riser/handlebar combinations that just didn't work out comfort wise. Nothing is worse than hand, arm or neck cramps on a long ride. Don't just "think" it feels right, try it if you can.

    If REAL comfort means spending just a little bit more for cables etc, take your time...save up some extra cash and do it right. You'll thank yourself a million times over.

Reply

You must log in to post.